Backup Camera System With Commercial Mirror Monitor

Model # RVS-082572
Backup Camera System With Commercial Mirror Monitor
Model # RVS-082572

The backup camera system is complete with a crystal clear 7" DIGITAL TFT LCD COLOR monitor with mirror image capability, a 3 channel multiplexer with automatic system switch, a 170° MT9V136 camera with night vision and all the wires, connectors and mounts you will need. The rear view camera is completely waterproof with an IP68 rating, strong and reliable, shock resistant and a 10G vibration rating (highest in the industry). The backup camera mounts to the handle and looks OEM and flush with the vehicle. The camera is very easy to install and makes hitching and backing up easy. The system comes with a full year warranty.

Please Note: This monitor does not have a reflective glass to be used as a rear view mirror, it is a full 7" display.

Got Questions? You can use our chat or send us an email with your questions.


RVS-082572 Camera Highlights

Tailgate Backup Camera

The Tailgate Backup Camera is built with an MT9V136 lens with an ultra wide viewing angle of 170°.

It's tiny size (less than an inch long, wide and deep) makes it ideal for smaller vehicles and allows its installation

to be virtually invisible. It mounts flush against the vehicle and with an IP68 rating is fit to

operate in almost all weather conditions.


Monitor Highlights

Mirror Monitor 

The 7" TFT LCD Digital Color Monitor that comes with this system either attaches or replaces the existing rear view mirror

in the vehicle. This placement gives you perfect viewing of our backup cameras without taking

up room on your dash. It comes with optional grid lines and an in-built speaker with all its functions controlled

with the on-screen touch buttons or remote which comes included.



Multiplexer Highlights

Multiplexer and System

The control unit or "brains" of our system is what we call the multiplexer. It powers our system,

receives all camera feeds and sends them to the monitor. Its three inputs allow for multiple camera connection.

This multiplexer connects straight to the fuse box, handles 12-24 volts and

comes with a separate trigger wire for each camera connected.




Backup Camera System For Pickup Trucks Mounting Position RVS-082572

System Specs
Monitor Specs
    • TypeTFT LCD
    • Screen Size7"
    • Dot Resolution800 X 3 (RGB) X 480
    • Display Format/Contrast16:9
    • Display Brightness400cd/㎡
    • Viewing Angle90° Min
    • Video Input3 channel
    • Video Source1Vp-p, 75Ω
    • Power SupplyDC 12V-24V (+/- 10%)
    • Power Consumption5W
    • Operating Temperature-10°C ~ +65°C
    • Video SystemAuto NTSC/PAL
    • Overall Dimensions9.5" (L) x 4.5" (H) x 1" (D)
    • Weight400G
    • Vibration Rating5G
    • Dot Pitch0.192 (H) X 0.1805 (V)
    • Sync SystemInternal
Camera Specs
  • CameraMT9V136
  • Picture Elements250,000 pixels
  • Gamma Correctionr=0.45 to 1.0
  • Image Sensor480 TV lines, PAL: 500 (H) x 582 (V), NTSC: 510 (H) x 492 (V)
  • Lens2.1mm
  • View Angle170°
  • Sync SystemInternal Synchronization
  • Night VisionYes
  • Usable Illumination0.3 Lux
  • Power SourceDC 12V-24V (+/- 10%)
  • S/N RatioMore than 48dB
  • Electronic Iris1/50, 160-1/100,000sec
  • Video Output1Vp.p 75ohm
  • Vibration Rating10G
  • Operating Temperature-30°C ~ +50°C / RH 95% Max
  • Storage Temperature-30°C ~ +50°C / RH 95% Max
In The Box
  • 1 - Color MT9V136 Tailgate Camera with Night Vision

  • 1 - 7" TFT LCD Digital Mirror Monitor

  • 1 - 3 Channel Multiplexer Control Unit

  • 1 - 33’ Camera Cable

  • 1 - Remote Control 

  • 1 - Power Connection Wire

  • 1 - Double RCA + Power Converter (to connect external audio, video and power)

  • 1 - Screw Kit for installation

RVS Systems warrants this product against material defects for a period of one (1) year from the date of purchase. We reserve the right to repair or replace any such defective unit at our sole discretion. RVS Systems is not responsible for a defect in this system as a result of misuse, improper installation, damage or mishandling of the electronic components. We are not responsible for consequential damages of any kind.